RULE-CLASSES

adding rules to the database 
Major Section:  ACL2 Documentation


Example Form (from community book finite-set-theory/total-ordering.lisp):
(defthm <<-trichotomy
  (implies (and (ordinaryp x)
                (ordinaryp y))
           (or (<< x y)
               (equal x y)
               (<< y x)))
  :rule-classes
  ((:rewrite :corollary
             (implies (and (ordinaryp x)
                           (ordinaryp y)
                           (not (<< x y))
                           (not (equal x y)))
                      (<< y x)))))

General Form:
a true list of rule class objects as defined below

Special Cases:
a symbol abbreviating a single rule class object

When defthm is used to prove a named theorem, rules may be derived from the proved formula and stored in the database. The user specifies which kinds of rules are to be built, by providing a list of rule class names or, more generally, rule class objects, which name the kind of rule to build and optionally specify varioius attributes of the desired rule. The rule class names are :REWRITE, :BUILT-IN-CLAUSE, :CLAUSE-PROCESSOR, :COMPOUND-RECOGNIZER, :CONGRUENCE, :DEFINITION, :ELIM, :EQUIVALENCE, :FORWARD-CHAINING, :GENERALIZE, :INDUCTION, :LINEAR, :META, :REFINEMENT, :TAU-SYSTEM, :TYPE-PRESCRIPTION, :TYPE-SET-INVERTER, and :WELL-FOUNDED-RELATION. Some classes require the user-specification of certain class-specific attributes. Each class of rule affects the theorem prover's behavior in a different way, as discussed in the corresponding documentation topic. In this topic we discuss the various attributes that may be attached to rule classes.

A rule class object is either one of the :class keywords or else is a list of the form shown below. Those fields marked with ``(!)'' are required when the :class is as indicated. 

(:class 
  :COROLLARY term
  :TRIGGER-FNS (fn1 ... fnk) ; provided :class = :META (!)
  :TRIGGER-TERMS (t1 ... tk) ; provided :class = :FORWARD-CHAINING
                             ;       or :class = :LINEAR
  :TYPE-SET n                ; provided :class = :TYPE-SET-INVERTER
  :TYPED-TERM term           ; provided :class = :TYPE-PRESCRIPTION
  :CLIQUE (fn1 ... fnk)      ; provided :class = :DEFINITION
  :CONTROLLER-ALIST alist    ; provided :class = :DEFINITION
  :INSTALL-BODY directive    ; provided :class = :DEFINITION
  :LOOP-STOPPER alist        ; provided :class = :REWRITE
  :PATTERN term              ; provided :class = :INDUCTION (!)
  :CONDITION term            ; provided :class = :INDUCTION
  :SCHEME term               ; provided :class = :INDUCTION (!)
  :MATCH-FREE all-or-once    ; provided :class = :REWRITE
                                     or :class = :LINEAR
                                     or :class = :FORWARD-CHAINING
  :BACKCHAIN-LIMIT-LST limit ; provided :class = :REWRITE
                                     or :class = :META
                                     or :class = :LINEAR
                                     or :class = :TYPE-PRESCRIPTION
  :HINTS hints               ; provided instrs = nil
  :INSTRUCTIONS instrs       ; provided  hints = nil
  :OTF-FLG flg)
When rule class objects are provided by the user, most of the fields are optional and their values are computed in a context sensitive way. When a :class keyword is used as a rule class object, all relevant fields are determined contextually. Each rule class object in :rule-classes causes one or more rules to be added to the database. The :class keywords are documented individually under the following names. Note that when one of these names is used as a :class, it is expected to be in the keyword package (i.e., the names below should be preceded by a colon but the ACL2 documentation facilities do not permit us to use keywords below).

Some Related Topics

See also force, case-split, syntaxp, and bind-free for ``pragmas'' one can wrap around individual hypotheses of linear and rewrite rules to affect how the hypothesis is relieved.

Before we get into the discussion of rule classes, let us return to an important point. In spite of the large variety of rule classes available, at present we recommend that new ACL2 users rely almost exclusively on (conditional) rewrite rules. A reasonable but slightly bolder approach is to use :type-prescription and :forward-chaining rules for ``type-theoretic'' rules, especially ones whose top-level function symbol is a common one like true-listp or consp; see type-prescription and see forward-chaining. However, the rest of the rule classes are really not intended for widespread use, but rather are mainly for experts.

We expect that we will write more about the question of which kind of rule to use. For now: when in doubt, use a :rewrite rule.

:Rule-classes is an optional keyword argument of the defthm (and defaxiom) event. In the following, let name be the name of the event and let thm be the formula to be proved or added as an axiom.

If :rule-classes is not specified in a defthm (or defaxiom) event, it is as though what was specified was to make one or more :rewrite rules, i.e., as though :rule-classes ((:rewrite)) had been used. Use :rule-classes nil to specify that no rules are to be generated.

If :rule-classes class is specified, where class is a non-nil symbol, it is as though :rule-classes ((class)) had been used. Thus, :rule-classes :forward-chaining is equivalent to :rule-classes ((:forward-chaining)).

We therefore now consider :rule-classes as a true list. If any element of that list is a keyword, replace it by the singleton list containing that keyword. Thus, :rule-classes (:rewrite :elim) is the same as :rule-classes ((:rewrite) (:elim)).

Each element of the expanded value of :rule-classes must be a true list whose car is one of the rule class keyword tokens listed above, e.g., :rewrite, :elim, etc., and whose cdr is a ``keyword alist'' alternately listing keywords and values. The keywords in this alist must be taken from those shown below. They may be listed in any order and most may be omitted, as specified below.

:Corollary -- its value, term, must be a term. If omitted, this field defaults to thm. The :corollary of a rule class object is the formula actually used to justify the rule created and thus determines the form of the rule. Nqthm provided no similar capability: each rule was determined by thm, the theorem or axiom added. ACL2 permits thm to be stated ``elegantly'' and then allows the :corollary of a rule class object to specify how that elegant statement is to be interpreted as a rule. For the rule class object to be well-formed, its (defaulted) :corollary, term, must follow from thm. Unless term follows trivially from thm using little more than propositional logic, the formula (implies thm term) is submitted to the theorem prover and the proof attempt must be successful. During that proof attempt the values of :hints, :instructions, and :otf-flg, as provided in the rule class object, are provided as arguments to the prover. Such auxiliary proofs give the sort of output that one expects from the prover. However, as noted above, corollaries that follow trivially are not submitted to the prover; thus, such corollaries cause no prover output.

Note that before term is stored, all calls of macros in it are expanded away. See trans.

:Hints, :instructions, :otf-flg -- the values of these fields must satisfy the same restrictions placed on the fields of the same names in defthm. These values are passed to the recursive call of the prover used to establish that the :corollary of the rule class object follows from the theorem or axiom thm.

:Type-set -- this field may be supplied only if the :class is :type-set-inverter. When provided, the value must be a type-set, an integer in a certain range. If not provided, an attempt is made to compute it from the corollary. See type-set-inverter.

:Typed-term -- this field may be supplied only if the :class is :type-prescription. When provided, the value is the term for which the :corollary is a type-prescription lemma. If no :typed-term is provided in a :type-prescription rule class object, we try to compute heuristically an acceptable term. See type-prescription.

:Trigger-terms -- this field may be supplied only if the :class is :forward-chaining or :linear. When provided, the value is a list of terms, each of which is to trigger the attempted application of the rule. If no :trigger-terms is provided, we attempt to compute heuristically an appropriate set of triggers. See forward-chaining or see linear.

:Trigger-fns -- this field must (and may only) be supplied if the :class is :meta. Its value must be a list of function symbols (except that a macro alias can stand in for a function symbol; see add-macro-alias). Terms with these symbols trigger the application of the rule. See meta.

:Clique and :controller-alist -- these two fields may only be supplied if the :class is :definition. If they are omitted, then ACL2 will attempt to guess them. Suppose the :corollary of the rule is (implies hyp (equiv (fn a1 ... an) body)). The value of the :clique field should be a true list of function symbols, and if non-nil must include fn. These symbols are all the members of the mutually recursive clique containing this definition of fn. That is, a call of any function in :clique is considered a ``recursive call'' for purposes of the expansion heuristics. The value of the :controller-alist field should be an alist that maps each function symbol in the :clique to a list of t's and nil's of length equal to the arity of the function. For example, if :clique consists of just two symbols, fn1 and fn2, of arities 2 and 3 respectively, then ((fn1 t nil) (fn2 nil t t)) is a legal value of :controller-alist. The value associated with a function symbol in this alist is a ``mask'' specifying which argument slots of the function ``control'' the recursion for heuristic purposes. Sloppy choice of :clique or :controller-alist can result in infinite expansion and stack overflow.

:Install-body -- this field may only be supplied if the :class is :definition. Its value must be t, nil, or the default, :normalize. A value of t or :normalize will cause ACL2 to install this rule as the new body of the function being ``defined'' (fn in the paragraph just above); hence this definition will be installed for future :expand hints. Furthermore, if this field is omitted or the value is :normalize, then this definition will be simplified using the so-called ``normalization'' procedure that is used when processing definitions made with defun. You must explicitly specify :install-body nil in the following cases: fn (as above) is a member of the value of constant *definition-minimal-theory*, the arguments are not a list of distinct variables, equiv (as above) is not equal, or there are free variables in the hypotheses or right-hand side (see free-variables). However, supplying :install-body nil will not affect the rewriter's application of the :definition rule, other than to avoid using the rule to apply :expand hints. If a definition rule equates (f a1 ... ak) with body but there are hypotheses, hyps, then :expand hints will replace terms (f term1 ... termk) by corresponding terms (if hyps body (hide (f term1 ... termk))).

:Loop-stopper -- this field may only be supplied if the class is :rewrite. Its value must be a list of entries each consisting of two variables followed by a (possibly empty) list of functions, for example ((x y binary-+) (u v foo bar)). It will be used to restrict application of rewrite rules by requiring that the list of instances of the second variables must be ``smaller'' than the list of instances of the first variables in a sense related to the corresponding functions listed; see loop-stopper. The list as a whole is allowed to be nil, indicating that no such restriction shall be made. Note that any such entry that contains a variable not being instantiated, i.e., not occurring on the left side of the rewrite rule, will be ignored. However, for simplicity we merely require that every variable mentioned should appear somewhere in the corresponding :corollary formula.

:Pattern, :Condition, :Scheme -- the first and last of these fields must (and may only) be supplied if the class is :induction. :Condition is optional but may only be supplied if the class is :induction. The values must all be terms and indicate, respectively, the pattern to which a new induction scheme is to be attached, the condition under which the suggestion is to be made, and a term which suggests the new scheme. See induction.

:Match-free -- this field must be :all or :once and may be supplied only if the :class is either :rewrite, :linear, or :forward-chaining. (This field is not implemented for other rule classes, including the :type-prescription rule class.) See free-variables for a description of this field. Note: Although this field is intended to be used for controlling retries of matching free variables in hypotheses, it is legal to supply it even if there are no such free variables. This can simplify the automated generation of rules, but note that when :match-free is supplied, the warning otherwise provided for the presence of free variables in hypotheses will be suppressed.

:Backchain-limit-lst -- this field may be supplied only if the :class is either :rewrite, :meta, :linear, or :type-prescription. It is further required either only one rule is generated from the formula or, at least, every such rule has the same list of hypotheses. The value for :backchain-limit-lst must be nil; a non-negative integer; or, except in the case of :meta rules, a true list each element of which is either nil or a non-negative integer. If it is a list, its length must be equal to the number of hypotheses of the rule and each item in the list is the ``backchain limit'' associated with the corresponding hypothesis. If backchain-limit-lst is a non-negative integer, it is defaulted to a list of the appropriate number of repetitions of that integer. The backchain limit of a hypothesis is used to limit the effort that ACL2 will expend when relieving the hypothesis. If it is NIL, no new limits are imposed; if it is an integer, the hypothesis will be limited to backchaining at most that many times. Note that backchaining may be further limited by a global backchain-limit; see backchain-limit for details. For different ways to reign in the rewriter, see rewrite-stack-limit and see set-prover-step-limit. Jared Davis has pointed out that you can set the :backchain-limit-lst to 0 to avoid any attempt to relieve forced hypotheses, which can lead to a significant speed-up in some cases.

Once thm has been proved (in the case of defthm) and each rule class object has been checked for well-formedness (which might require additional proofs), we consider each rule class object in turn to generate and add rules. Let :class be the class keyword token of the ith class object (counting from left to right). Generate the rune (:class name . x), where x is nil if there is only one class and otherwise x is i. Then, from the :corollary of that object, generate one or more rules, each of which has the name (:class name . x). See the :doc entry for each rule class to see how formulas determine rules. Note that it is in principle possible for several rules to share the same name; it happens whenever a :corollary determines more than one rule. This in fact only occurs for :rewrite, :linear, and :forward-chaining class rules and only then if the :corollary is essentially a conjunction. (See the documentation for rewrite, linear, or forward-chaining for details.)